|
Ventus Custom Mount for Ipaq 310 with Tilt Swivel
| Part # |
Description Ipaq and PDA
Cradles |
Price |
Order |
|
|
1002021 |
Ventus 310 Cradle
Swivel Tilt Mount Choose , Mount Arm,
Power Converter or C310 Power Cable from Menus at Add To Cart |
|
 |
In Stock |
|
1000476 |
C310 Power Cable |
|
|
In Stock |
|
PWR-5B |
Power Converter, +12v to 5v, 2
DB9 Connections. Supplies +5v to Pin 8, GND for IPAQ, and +12v to Pin
7, 5v to Pin 8 GND for GPS. RX, TX pass through. Reverse polarity
protection. RFI Suppression. |
|
|
In Stock |
|
IPAQ 310 |
Ipaq 310
Details or to Purchasse |
 |
|
In Stock |
Mount Arm Pictures Below
Ventus
Custom Ipaq Mounts for SailPlanes with Tilt Swivel
This is Craggy
Aero's best cradle. It is small, sturdy, elegant and
lightweight. The power/data cable exits the back of the cradle so that
it won't interfere with your leg.
The power/data
cable includes connections for 5V power and GPS data connections. The price
includes a shielded power/data cable in a variety of lengths.
All lengths are in
stock. The power/data connector is also included in the price.
The tilt swivel allows the user to easily tilt the ipaq slightly for better sunlight
visibility.
Shielded cable is
used so the GPS data signals will not interfere with aircraft radio.
   
| Part # |
Description Ipaq and PDA
Cradles |
Price |
Order |
|
|
VENTUS Mount |
PDA Cradle for Ipaq 22xx, 38xx,
39xx, 51xx, 54xx, 55xx, 4705
for use with CAI 302, 302A CFR, Craggy Aero PWR-5b Power Converter, LX 1600,
LX7007. . Can be used with all
RAM mount arms shown below. Options can be selected at Add to Cart. |
|
|
All In Stock |
Select Ipaq
model, options
and RAM ARMS if required at add to cart page
Models:
-
H5555 - for Ipaq 38xx, 39xx, 51xx, 54xx, 55xx
-
H4700 - for Ipaq 47xx
-
H2200 - for Ipaq 22xx series
Options:
- C38 - DB-9m connector for Cambridge 302, 302A,
or GPS-NAV, or Craggy PWR-5B power converter, or Borgelt PDA-PS power
converter.
- LX38 - DB-9m connector for LX160, LX1600,
LX7007
Standard Cable Length:
- 0.3 m (11.8 inches)
- 0.5 m (19.7 inches)
- 1 m (3.281 feet, 39.4 inches)
- 2 m (6.56 feet)
- 3 m (9.84 feet)
|
All Ram Arms can be used with
this Mount connected to the tilt swivel or tilt swivel can be removed.
Order Ram arms below or
order as an option with the Ventus Cradle
|
Ram Arms for all Mounts - order
at add to cart with the ventus cradle or separately below.
|
Ventus Cradle RAM-F3 Diamond Base 3"
Double Socket Arm 1" Ball, Base to Base 5.0625" |
Ventus Cradle RAM-S3 RAM 4" Suction Cup with
3" Double socket Arm 1" Ball |
Ventus Cradle RAM-A-101U Ram Diamond Base Mount with Double Socket
arm. 3.125" Base to Base. 9/16" Ball |
|
RAM-A-101U-B Ram Diamond Base Mount with Double Socket
arm. 3.125" Base to Base. 9/16" Ball, Arm + 2 bases |
MGS470A .450 Dia. 9" long
Gooseneck. MSG6A 6" gooseneck, Diamond Bracket on one end nut on the other. Arm + 1
Diamond Base + 1/8 NPT Nut |
MGS470B .450 Dia. 9" long
Gooseneck, MSG6B 6" gooseneck Arm + 2 Diamond bases. |
|
RAM-238 Diamond Base 1" Ball |
MSGNut Detail 1/8 NPT |
RAM-B-201 |
| Part # |
Description |
Price |
|
| MGS470A |
.450 Dia. 9" long
Gooseneck. Use with all Craggy Cradles Diamond Bracket on one end nut
on other end |
 |
|
| MGS470B |
.450 Dia. 9" long
Gooseneck. Use with all Craggy Cradles Diamond Bracket on both ends |
 |
|
| MSG6A |
.450 Dia. 6" long
Gooseneck. Use with all Craggy Cradles Diamond Bracket on one end nut
on other end |
 |
|
| MSG6B |
.450 Dia. 6" long
Gooseneck. Use with all Craggy Cradles Diamond Bracket on both ends |
 |
|
| RAM-F3 |
Ram Diamond Base Mount with 3" Double Socket
arm. 1" Ball & Two Damond Bases |
 |
|
| RAM-S3 |
Ram 4" Suction Cup Mount with 3"
Double Socket arm & 1 Diamond Base |
 |
|
| RAM-A-101U |
Ram Diamond Base Mount with Double Socket
arm. 3.125" Base to Base. 9/16" Ball & 2 Diamond Bases |
 |
|
| RAM-A-101U-B |
Ram Diamond Base Mount with Double Socket
arm. 4.625" Base to Base. 9/16" Ball & 2 Diamond Bases |
 |
|
| RAM-238 |
Ram 2 7/16" X 1 5/16" Diamond
Base with 1" Ball |
 |
|
| RAM-B-201 |
Ram Double Socket 3'' Arm for 1"
Balls |
 |
|
M625 Universal PDA Mount (Use
for most all PDA .)
Will also hold PDA with Expansion Pack or IGPS Jacket
Ipaq 22xx, 36xx, 37xx, 38xx, 39xx, 51xx, 55xx, 4xxx,
Series, Toshiba e800
M625 & RAM-F3
M625 & RAM-S3
M625 & RAM-A-101U
M625 & RAM-A-101U-B
Arms ratchet in on the M625 to hold the Ipaq securely.
Press button to release arms.
| Part # |
Description Ipaq and PDA
Cradles |
Price |
Order |
|
| M625 |
Universal PDA Cradle, Holds 3700,
3800, 3900, 5400 Series Ipaqs, Dell Axim and Ipaq with Transplant IGPS
Jacket. (RAM Arm not included order above). |
 |
|
In Stock |
VFR Yoke Mounts for use with M270, M470, M550 or M625
Cradles see above.
M625 & RAM Y3
| Part # |
Description |
Price |
Order |
| Ram-Y3 |
Ram Yoke Mount with 3" Double Socket arm,
fits 5/8" to 1 1/4" tube. (Cradle not included order cradle above) |
 |
|
|
