LX 1606

LX MiniMap KB-V

• USB-D vario is produced by LX Navigation with 35 Years experience in the design and manufacture of Soaring Instruments

• Over 10,000 instruments sold world wide, 50% + market share in European Market.

• New Sensor Technology with direct link to microcontroller no analog to digital conversion vario signal response is calm and without oscillations.

• Mechanical needle, which can indicate vertical speed, speed to fly value, netto vertical speed, or Relative vertical speed

• Speed to fly ball will tell us, if we have to fly faster or slower. If ball moves up, youhave to slow down and if ball moves down you have to speed up.

• Color LCD with upper and lower display.

  • Upper parameters can be displayed; average verticalspeed, local time, flight time, task remaining time

  • Lower  parameter displayed can be configured separately for Vario mode and SC mode.  Following parameters can be shown; Altitude (NN altitude), Distance (distance to the navigation point), Glide diff. (final glide altitude difference), Speed (TAS), Leg speed (speed on leg), QNH (ft) (NN altitude in ft), Flight levels.

• RS485 interface
• RS232 Serial interface for  Direct PowerFlarm or Flarm Input or any other GPS or  NMEA Stream
• Provides power to PDAs, PNAs
• Can be used standalone or with virtually any GPS or NMEA  Input.
• Advanced Vario customization and filtering
  • Units
  • Vario Filter, range averager, time constant
  • TE level and filtering by electronic TE Compensation solution
  • Dead audio zone by SC
  • Change of Mode by Speed if auto mode is used
  • Audio Style adaptation
    • Style
    • Frequency
    • Volume
  • LCD indicator  Customization:
    • Needle and SC indicator on the LCD
    • Altitude
    • Ave Vario
    • Distance
    • Time

SeeYou Mobile PDA, PNA LX Control Screens