Current PowerFlarm Updates, Manuals
The PowerFLARM StandAlone has a
built-in display and control knob, attached antennas, and internal battery.
It can also be powered with external power. A microSD card slot is
included in the front of the unit for flight log and other data transfers.
- Width: 96 mm / 3.8 inch
- Height: 46 mm / 1.8 inch
- Depth: 94 mm / 3.7 inch
- Micro SD slot on the left
Brick Version with PF Remote Display
The PowerFLARM Brick (not shown) remote display and
control knob and remote antennas. The PowerFLARM Remote Display
is the same size display screen and the same single knob/push-button user
interface as the stand alone version.
- Preliminary brick dimensions 3" X 3.7" X 1.5"
- Display 3.7" X 1.8" X .25"
- External Antennas
- No battery
- Powered from Glider Battery
- Panel mount remote USB port
- Additional data output port
Brick Version CAD Drawings
Brick Version ButterFly Rectangular/ 57mm Display
- Flarm data shown on External Display, PDA, MiniMap,
- Optional ButterFly Display
ButterFLy 57mm fits in 57 mm standard 2.25" instrument hole
PowerFLARM standalone is powered by aircraft power or
fully autonomous by 6 AA-Cell batteries. PowerFLARM can operate without any
external data- or power source thus is legally operable in any kind of
aircraft. No certification nor special installation required!
PowerFLARM detects inserted batteries. If
rechargeable, PowerFLARM charges batteries through its integrated charging
circuit. PowerFLARM lasts up to 8 hours or 4 average flights - all on one
Easy to Install
PowerFLARM is loaded with features - yet incredibly tiny. Finding the
right place to mount is no problem.
The bright, latest generation OLED Display is perfectly readable from any
angle, providing even more options when installing.
|Stunning: Display and Audio
The contrast display
is perfectly readable, even in direct sunlight. It has beautiful colors,
viewable from any angle - perfect if you and your copilot wish to use
PowerFLARM features an integrated speaker, no problem even in very noisy
airframes. PowerFLARM also features audio output to headsets or sound panels.
Voice alarms are available as an upgrade from mid 2011.
Volume of speaker and audio output are separately controllable - so you
can make everything perfectly suit your needs.
|Clear and intuitive
PowerFLARM is very easy to
understand and use.
The user interface intentionally dismisses unimportant information only
showing important traffic. This makes situations easier to interpret.
PowerFLARM supports you without distraction.
You gain more time to look out, yet still see all important info you
|No buttons, no pain!
PowerFLARM has only one single
big control knob that lets you easily access all functions in no time. It is
perfectly usable, even in very gusty weather conditions.
The integrated menu is very easy to use, too. There is no need for
guessing which button to press or to navigate through complex menu-dialogs.
Everything is where you would expect it to be.
Latest on the IGC Flight Recorder issue:
Powerflarm for USA will have IGC-approval through
Approval may well happen after first units ship.
This is relatively low risk as the Flarm folks
have done IGC-approval before and know the drill.
Compatibility with current Flarm Products:
PowerFLARM and FLARM will be fully compatible and
PowerFLARM will have a significant higher range and
better transmission reliability (multiple antennas), though.
However all current FLARM versions (also those of
our licensees) are and will remain illegal to import, sell or use in North
America as they do not meet FCC requirements (and have no FCC ID,
Engine Noise Level Select purchased from
Power Flarm Software Key
K-6 Team MUX Multiplexer for use with B50, B500, Cai 302
Butterfly Display Option Approx $495
ButterFly Display 57 mm
LXNAV FlarmView Display
- Color display
- QVGA resolution 320*240 pixels
- Sunlight readable
- Small size - Dimensions(W x H x D): 65 x 42 x 9 mm
- Extremely slim 9mm
- Loud acoustic warning
- Color warnings
- A/C MODE traffic (undirected warnings)
- Supports latest flarm dataport specificationVer.6
- Compatible with Flarm and PowerFlarm
- FlarmNet database + User database
- intuitive user interface
- 12V supply (may not work on old hardware designs, where only 3.3Volts
are provided. For such cases we offer an adapter)
|Volume Group Discount Program for the
Standalone and Brick with PF Display
|To Qualify for a Group Discount the following
terms must be met:
- A group does not need to be an officially
sanctioned club by the SSA.
- Generally, a local club operating on an airfield
is our model.
- The group needs to be based at one airfield
so that the benefit is
appreciated by the participants.
- The order must come from one representative
who will handle all the questions and be the contact person with the
- This person will submit the order, collect the
money and all units will be shipped to him/her for further delivery
to the members of the group.
- Some pilots fly at several airfields. We would
consider their "BASE" to be the airfield from which 60% of their
Please call for more information
PowerFlarm Video of Collision Warning US Sports Class
Fly Safer with Power Flarm
Comparison with Flarm